Shenzhen Tuodda Electronic Co., Ltd.
Main products:led neon light,LED Tube,LED Bulb,LED Strip light,LED Panel light
Products
Contact Us
  • Contact Person : Ms. Liu Vivi
  • Company Name : Shenzhen Tuodda Electronic Co., Ltd.
  • Tel : 86-755-23941426
  • Fax : 86-755-83305605
  • Address : Guangdong,shenzhen,712, 7th Floor,BaoYuan Building, BaoYuan Road, Xi Xiang Street, Bao'An District ,Shenzhen
  • Country/Region : China
  • Zip : 518102

PCB wireless DMX receiver/transmitter

PCB wireless DMX receiver/transmitter
Product Detailed
dmx wireless reciever/transmitter 1. Small Size and suits for interior of accessed lighting 2. Single key to operate

                                                              PCB DMX512 wireless module

Brief:

DMX512 wireless receiver/transmitter transmits standard DMX512 protocol data (generated by console )by wireless way, which solves lighting control issues of wireless transmitting completely between console and lighting, lighting and lighting and so on,  It get rid of connecting cable limited completely

And also can ensure without any time delay when signal data is transmitting, signal data is real time and reliably.

    This product adopt 2.4G ISM frequency section( global opening section) without permission limited

High effective GFSK modulate,communication design ; 126 channels jumping frenquecy automaticly,high anti-jamming ability.

Application: Upgrade DMX512 stage lighting

Product picture: 

  Product feature:

Product name:2.4G wireless DMX512 R/T moulding boardSmall size,Esay to suit for interior of accessed lightingSingle key to operate,tricolor LED displayingTransmitting standard DMX512 protocol data of console,also can transmitting  lighting and lighting DMX512 protocol data.126 channels jumping frenquecy automaticly,high anti-jamming ability. to ensure works reliability7 groups ID code settable,User can use 7 groups individual wireless net without any interfere each other in the same place..Input voltage:5VDCWork frequency section:2.4G  ISM,126 channels.frequency sectionMax transmitting power rate:20dBmReceiver sensitive:-94dBmSignal port:RS485 or CPU series port AURT

Operating manual:

ID code and LED color corresponding relateship:

        1:RED

        2:GREEN

        3:RED+GREED

        4:BLUE

        5:RED+BLUE

        6:GREEN+BLUE

        7:RED+GREED+BLUE

Press key 1 time to indicate ID setting,,Press again to set ID,then ID value adding 1 each time.by pressWorking condition:

         LED constant lit up:no DMX or wireless singal.

        Red LED flash:transmitting.

        Green LED flash:receiveing

RF frequency- - - - - - - - - - - - 2. 400-2. 525 G,total 126 channels,it’s searching automaticly,ID Code- - - -“1-7” groups ID code,press ”KEY” for setting,it only can works under same ID code.of transmitter and receiver.

Establishing Communication:

Power on DMX512 wireless received board and transmitted board.Press “Key” button to set same ID value of transmitted board and received board., please use different ID value if you need use more than 1 group wireless net at same time in same place.The red LED flashs when transmitter transmits DMX data by no interfered frequency section, then receiver changes communicated frequency section.  Green LED flash till received corrected same ID value, LED flash more fast once DMX data more fast. Communication was established correctly then

Cauction::

        Don’t repair this R/T board by yourself, it should be returned to manufacturer to repair if any problems.

PCB wireless DMX receiver/transmitter



Copyright Notice @ 2008-2012 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.